Description
Application:
Simply add Spectroline WATER-GLO ULTRA GREEN fluorescent dye to the system in the appropriate quantity and allow it to circulate for at least 5 min.
Reduce ambient brightness as much as possible and examine all areas using a UV light or blue light system After repairing and cleaning the leaks with degreaser or the usual cleaner, simply run and check the system again.
Recommended dosage:
5ml WATER-GLO ULTRA GREEN to 20 liters of water
30 ml WATER-GLO ULTRA GREEN to 120 l water
120 ml WATER-GLO ULTRA GREEN to 480 l water
240 ml WATER-GLO ULTRA GREEN to 960 l water
500 ml WATER-GLO ULTRA GREEN to 2000 l of water
Store dark and cool (below 40°C).
Application examples:
Situations such as: the vibrating machine is leaking and has a leak, you need to locate a leak for a saw or you need to find a water leak in a tractor or you need an engine unit leak search in the aviation sector. Then the leak detection dyes using UV light for high-contrast displays are just right for you. Put the Water-Glo 802 (WD-802) into the water circuit. Then check the machine for leaks with the UV-LED lamp. This enables you to carry out industrial quality assurance with process reliability. The leak test for aqueous circulatory systems is environmentally friendly and the leak test saves money due to the reduced drainage of liquids. As an alternative to the Spectroline WD-802, we recommend: WFS-82 green fluorescent dye for leak detection in aqueous systems, solvent-free